Wire Feeders
Filter by Process Zone:
Choosing the Right Drive Roll is Key for Smooth Wire Feeding
Is your wire welding operation being challenged by poor feedability, birdnesting, burnback, or clogging of the gun liner? If so, you may be using the wrong type or size of drive rolls for the job, or using improper drive roll tension. Here are some tips to help you prevent downtime and its associated costs due to poor wire feeding.
Let It Flow: Tube & Pipe Welding
As business picks up for tube and pipe fabricators, they must reduce their setup times and become more versatile in the flow of work they are able to handle, all while increasing their productivity to remain competitive. Here is some of the latest tube and pipe fabrication and welding equipment that can help these shops smooth out jobs so that their work goes with the flow.
Portable Controller/Wire Feeder Simplifies Job-Site Setup
The APEX 30M mechanized controller from Lincoln Electric controls and monitors processes for consistency and logs data for reporting and archiving needs in a variety of structural, maritime, power generation, process piping and construction applications.
How to Increase Pipe Shop Productivity
ESAB’s Warrior Feed Dual 304 wire feeder has all the features that pipe shops require, including gas purge, wire inch, trigger lock (2T/4T control), burnback, slow run-in speed and the ability to preset wire feed speed and voltage.
Wire Feeders: From Basic to Advanced
Using the right wire feeder for the job is more important than many realize, because it ensures that welding operators spend more time welding with less downtime due to poor wire feeding. Here are some factors to consider to match the most appropriate wire feeder to the application.
Wire Feeder Delivers High Productivity in Heavy Fabrication Applications
The Flex Feed 84 industrial wire feeder from Lincoln Electric is ideal for heavy and general fabrication, construction, structural and heavy equipment applications and includes a built-in interface for hard automation.
Premium Feeding for Construction and Field Welding
These advanced wire feeders from ESAB are ideal for ship/barge, off-shore and construction applications where operators change welding parameters, use hotter settings for welding in the flat position and cooler settings for welding vertical up.
Reels Quickly Connect to Any Welder
Power or rewind SWCR Series reels from Hannay Reels are ideal for use with a single conductor electrode cable or grounding lead.
Smooth, Consistent Feeding Spool Gun for Aluminum MIG Welding
The Spoolmatic Pro from Miller Electric is ideal for trailer manufacturing, ship and boat building, and general fabrication.
Arc Welding Reel Improve Arc Welding Operations
The SWCR arc welding reel from Hannay Reels uses a heavy-duty spring motor that allows self-contained rewind, while a non-sparking ratchet assembly locks the reel in place when the desired amount of cable has been payed out.
Wire Feeders
This device feeds the electrode wire at a specified rate to the welding arc. A constant speed wire feeder is used with a CV power source. Voltage is set at the power source while the wire feed speed that controls…
What You Must Know About the Wire Feeder: Unsung Hero of the Welding World
Modern wire feeders remove the guesswork that leads to inconsistent welding results. They can simplify the welder’s job and improve productivity. If it has been some time since you last upgraded your welding equipment, Bob Bitzky of ESAB recommends that you examine these five areas of advancements before purchasing your next wire feeder.