Coil Handling Equipment
Filter by Process Zone:
Multi-Mode Feed Capability Increases Coil-Fed Laser Blanking Speeds
With Continuous Mode (On the Fly Cutting) capabilities on coil-fed laser blanking systems from LaserCoil Technologies, users can choose either Feed Index Mode (Stop/Start) or Continuous Mode for the best production run rate and reliability.
United Performance Metals Expands Facility
They are adding another 10,000 sq ft to their Connecticut operation.
TMW to Install New Slitting Line
The slitter will process material 0.030 in to 0.315 in thick from master coils of up to 60,000 lb.
U.S. Steel and Kobe Steel Invest in Advanced High-Strength Steel Capabilities
They are spending $400 million on a new continuous galvanizing line at PRO-TEC Coating Company, their joint venture in Ohio.
Power Straightener for Processing High Yield Materials
The upgraded Series 250 power straightener from COE Press Equipment uses over 30 percent increased strength and rigidity to process Advanced High Strength Steel coil widths from 1.0 in to 54 in, thickness from .010 in to .187 in, and coil weights up to 20,000 lb.
Miro Manufacturing Invests in Servo Press Technology
They purchase a Komatsu H2W300 330 ton servo press with a CWP ServoMax 36 in feed line for stamping operations.
COE Press Equipment Appoints New CEO
Hunter Coe is the new chief executive officer of the company, succeeding his father John.
Coil Fed Laser Cutting with Unmatched Flexibility
The LINACUT coil fed laser cutting system from Dimeco Coil Technologies combines the flexibility of laser cutting and turret punching together with the performance of coil fed processes with a fully automatic part sorting system for non-stop processing of coils.
Advanced Coil Processing Systems
Schnutz high-end precision levelers from Burghardt + Schmidt use special simulation software and exchangeable roll cassettes for quick and easy changeovers that produce perfect, dead-flat sheet metal flatness and optimal reduction of residual stresses.
Aluminum Transportation Group Adds New Members
Alcoa and Tri-Arrows, both leaders in producing aluminum alloys for automotive applications, join ATG.
U.S. Machine Tool Orders Accelerate
June manufacturing technology orders climbed 6.5 percent over May to $373.2 million.
Press Feed Equipment Minimizes Material Scrap
The Zig-Zag servo feed from Dallas Industries has a one, two or three-out capacity with the servo feed index cycle made simultaneously with the cross-slide lateral travel, producing a diagonal stock movement in the automatic mode that minimizes the scrap generated when stamping out circles. The manual mode has forward or reverse indexing and cross-travel indexing.
Industry News
