Supplier Directory Subscribe
Advertisement
Advertisement
Advertisement
Advertisement
Home / Salvation Drilling Tools Remains at the Forefront of Innovation in Downhole Rotary Drilling Equipment

Salvation Drilling Tools Remains at the Forefront of Innovation in Downhole Rotary Drilling Equipment

With a mission to develop a next-generation bit design, Salvation Drilling Tools enlisted Sandvik Coromant and its advanced machining knowledge to help pioneer a new three-cone rotary rock bit.

Posted: August 19, 2024

A new process for holding and machining major components that reduced cycle time, complexity and cost was demonstrated by the Sandvik Coromant Customized Solutions team.
The process was done-in-one, from raw material to finished leg component, in one operation. The bar on the left was loaded into Sandvik Coromant’s Mazak test machine at its Mebane, N.C., tech center, and the in-tolerance finished part came out requiring no further machining operations.
On the left, the top view of a drill bit body made from hardened stainless steel at the Sandvik Coromant Mebane, N.C. tech center, with the mud nozzle and leg bores. At right is a side view of the drill bit body, with the American Petroleum Institute threads machined on the Mazak Integrex testing machine.
On the left, the top view of a drill bit body made from hardened stainless steel at the Sandvik Coromant Mebane, N.C. tech center, with the mud nozzle and leg bores. At right is a side view of the drill bit body, with the American Petroleum Institute threads machined on the Mazak Integrex testing machine.
A new process for holding and machining major components that reduced cycle time, complexity and cost was demonstrated by the Sandvik Coromant Customized Solutions team.
Advertisement
Advertisement
Salvation Drilling Tools Remains at the Forefront of Innovation in Downhole Rotary Drilling Equipment, Salvation Drilling Tools, double the rate of penetration and life expectancy, improved bore circularity, downhole cone loss, oil and gas drilling technologies, Gary Warwick, faster penetration, longer drill bit life, Stellar Industrial Supply Company, Sandvik Coromant, Mazak Integrex i-450 H, laydown threading tool
The process was done-in-one, from raw material to finished leg component, in one operation. The bar on the left was loaded into Sandvik Coromant’s Mazak test machine at its Mebane, N.C., tech center, and the in-tolerance finished part came out requiring no further machining operations.

Salvation Drilling Tools from San Bernardino, Calif., is leading the development for a new approach in drill bits, engineered from the ground up to provide up to double the rate of penetration and life expectancy, improved bore circularity and an end to downhole cone loss.

The new approach is in response to the push for more productivity and lower costs, which are driving the need to advance oil and gas drilling technologies. Rock bits in particular are an area where new improvements can offer greater efficiency, reliability and long operating life.

Revolutionary New Design

Salvation Drilling Tools Remains at the Forefront of Innovation in Downhole Rotary Drilling Equipment, Salvation Drilling Tools, double the rate of penetration and life expectancy, improved bore circularity, downhole cone loss, oil and gas drilling technologies, Gary Warwick, faster penetration, longer drill bit life, Stellar Industrial Supply Company, Sandvik Coromant, Mazak Integrex i-450 H, laydown threading tool
On the left, the top view of a drill bit body made from hardened stainless steel at the Sandvik Coromant Mebane, N.C. tech center, with the mud nozzle and leg bores. At right is a side view of the drill bit body, with the American Petroleum Institute threads machined on the Mazak Integrex testing machine.

Salvation Drilling Tools is focused on a revolutionary new product: a patented three-cone rotary rock bit for oil and gas drilling that completely reimagines and reengineers the design concept — something that hasn’t changed in 90 years.

“Salvation’s all-new design is not an improvement on the old, it’s a radical departure from the industry standard,” said Gary Warwick, CEO of Salvation Drilling Tools. “We’ve introduced multiple innovations, including a one-piece precision-machined body that provides truer geometry, greater strength, superior physical wear characteristics and unmatched corrosion resistance.”

The new design incorporates a fully machined assembly made with higher strength and more wear-resistant alloys that are typically not weldable. Removing the traditional welding points from previous three-cone bit designs eliminates key points of failure and results in a more precise rock bit that reduces run-out, minimizes the creation of out-of-round bores (which require redrilling) and can support both faster penetration and longer drill bit life.

With its new design, the Salvation Drilling Tools team recognized that manufacturing this assembly would present some new challenges, especially around the requirements for advanced machining.

Within the drill bit assembly there are seven complex components that need to be machined: the main bit body, machined from one piece of stainless aircraft alloy steel; three cones used to support the carbide cutting structure; and three legs that hold the rotary cutters. Machining these parts required new levels of precision and more efficient production to significantly reduce manufacturing costs.

Salvation had been working with Stellar Industrial Supply Company, a Sandvik Coromant distributor, as production of the new bit began ramping up. Recognizing the need for an integrated solution, Stellar introduced Sandvik Coromant to the Salvation team for further collaboration. A global leader in metal-cutting tools and technology, Sandvik Coromant provided additional engineering expertise and tooling recommendations to streamline their manufacturing operations — especially around the machining.

Salvation Drilling Tools Remains at the Forefront of Innovation in Downhole Rotary Drilling Equipment, Salvation Drilling Tools, double the rate of penetration and life expectancy, improved bore circularity, downhole cone loss, oil and gas drilling technologies, Gary Warwick, faster penetration, longer drill bit life, Stellar Industrial Supply Company, Sandvik Coromant, Mazak Integrex i-450 H, laydown threading tool
On the left, the top view of a drill bit body made from hardened stainless steel at the Sandvik Coromant Mebane, N.C. tech center, with the mud nozzle and leg bores. At right is a side view of the drill bit body, with the American Petroleum Institute threads machined on the Mazak Integrex testing machine.

Using a One-and-done Approach

Initially, the Salvation team planned to produce the seven key components on different machines, moving parts from one machining center to the next, depending on the operation required. However, transferring components through multiple operations would be too costly and slow, requiring multiple machines and more labor and floor space. In addition, this presented a quality risk with each new part setup.

Leveraging its machining engineering expertise, Sandvik Coromant’s Customized Solutions team assessed the components and the production plans and recommended a major change in the approach — one that would be more efficient and provide both higher accuracy per part as well as lower costs.

The Coromant team recommended that Salvation use a “one-and-done” machining technique, going from raw stock to finished product on a single machine.

Collaboration is Everything in Process Development

The Coromant team engineered the new machining solution at its Sandvik Coromant Center, a state-of-the-art training, testing and R&D facility located at corporate headquarters in Mebane, N.C. Part of a global network of interconnected tech centers, the facility is equipped with the same machines that customers use so they can do their testing onsite, with access to Coromant experts across all areas of machining. In addition, Sandvik Coromant offers capabilities such as digital live machining for remote testing and monitoring.

For this approach, Sandvik Coromant utilized its newest and most sophisticated tool at the tech center — a Mazak Integrex i-450 H with main and sub spindles for turning, milling and 5-axis machining. The Coromant team developed a new process for holding and machining Salvation’s components to reduce cycle time, complexity and cost. The goal was to help Salvation establish a total production rate of 50 rock bit assemblies per day.

To reach that build rate with the most effective production quality and cost basis, the Sandvik Coromant solution included:

  • Vericut state-of-the-art simulation software, which enabled Salvation Drilling Tools to optimize its machining processes, reducing errors and ensuring the highest level of quality and accuracy in its products.
  • Mastercam CAM software to streamline the manufacturing workflow, resulting in more efficient operations and reduced complexity.
  • Advanced machining and cutting tool technology that provided the metal-cutting precision and efficiency needed to improve product quality and reduce production time.
Salvation Drilling Tools Remains at the Forefront of Innovation in Downhole Rotary Drilling Equipment, Salvation Drilling Tools, double the rate of penetration and life expectancy, improved bore circularity, downhole cone loss, oil and gas drilling technologies, Gary Warwick, faster penetration, longer drill bit life, Stellar Industrial Supply Company, Sandvik Coromant, Mazak Integrex i-450 H, laydown threading tool
A new process for holding and machining major components that reduced cycle time, complexity and cost was demonstrated by the Sandvik Coromant Customized Solutions team.

Sandvik Coromant also worked in conjunction with Mazak’s Western Technology Center in Torrance, Calif., to develop the machining process for the rock bit’s cones. This additional collaboration helped expedite the testing and verifications for all the major components that required machining.

The result was a complete machining recommendation, built around the one-and-done approach, which included tool selection, cutting data, fixture design, process development, full NC coding and verification, and runoff support.

Tolerances for Salvation’s rock bit components are extremely tight for the oil and gas industry — the majority are +/-0.0002” in variation. By eliminating the need for multiple transfers and setup, the one-and-done machining approach made it easier to hit that mark.

“As much as I was impressed by the one-and-done approach, I was equally impressed with the quality and performance of Sandvik Coromant’s cutting tool technology,” Warwick said. “For example, their API (American Petroleum Institute) laydown threading tool was especially impressive, cutting buttery smooth in-spec threads that required no deburring or further work. The lead-ins and lead-outs, which typically require attention after machining, were also perfect on the first attempt.”

The new recommendations also solved critical productivity goals. The average amount of part handling and workholding per component was reduced by 50%. This eliminated several fixtures and machining operations, enabling Salvation to reduce production costs by a minimum of 30%, providing a more competitive edge in the oil and gas drilling industry.

The single-piece flow means less risk of scrapping and lower cycle times, as well as significant reductions in part reworking for overall better part quality and dramatically higher production rates. Salvation is targeting five quality assemblies per cell every 24 hours, with 50 assemblies per day produced across 10 cells to satisfy market demand.

The collaboration and innovation between Salvation Drilling Tools and Sandvik Coromant demonstrates the power of partnership in achieving manufacturing excellence. By harnessing the latest machining technology and software solutions and the expertise of both teams, Salvation Drilling Tools is transforming its production processes to match the game-changing innovation engineered into the new three-cone rotary rock bit.

“With Sandvik Coromant’s invaluable help, the quality of our product is assured,” Warwick said. “We not only anticipate savings in labor and fixture costs but expect greater flexibility in production and faster build time, paving the way for a more competitive and sustainable future in the oil and gas drilling industry.”

www.salvationdrillingtools.com

www.sandvik-coromant.com

Subscribe to learn the latest in manufacturing.

Calendar & Events
Southeast Design – 2-Part Show
September 11 - 12, 2013
Greenville, SC
Mid-Atlantic Design – 2-Part Show
September 25 - 26, 2013
Phoenixville, PA
CMTS of Canada
September 30 - October 3, 2013
Mississauga, Canada
DISCOVER 2013
October 8 - 16, 2013
Florence, KY
Wisconsin Manufacturing and Technology Show
October 8 - 10, 2013
Wisconsin State Fair Park Exposition Center Halls B&C
WESTEC 2013
October 15 - 17, 2013
Los Angeles, CA
SOUTH-TEC
October 29 - 31, 2013
Greenville, SC
New England Design-2-Part Show
October 30 - 31, 2013
Marlborough, MA
DMG / Mori Seiki Manufacturing Days
November 12 - 15, 2013
Mori Seiki Manufacturing – Davis, CA
FABTECH
November 18 - 21, 2013
McCormick Place – Chicago, IL
Midwest Design-2-Part Show
November 20 - 21, 2013
Northern Kentucky Convention Center – Covington, KY
PCD Tool Manufacturing
November 20, 2013
United Grinding North America – Fredricksburg, VA
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement