Battery-powered Hole Puncher is Well Suited for On-site Hole Punching

Hougen Manufacturing, (Swartz Creek, MI) has introduced a new battery-powered Hougen®-Ogura™ Punch-Pro™ Electro-hydraulic portable hole puncher. The new 40V battery powered unit, 76004PR model, can be easily operated on-site where electric power may not be available or high up on a man-lift where power is not readily accessible. A powerful 40 volt battery, packs enough punch to generate 17 tons of punching force and can punch round or oblong holes up to 25/32″ diameter in 3/8″ mild steel in as little as 4 seconds. The unit’s throat depth is 1-9/16″ and it can punch flat bar, angle iron, H-steel & channel.

Weighing just 24.9 lbs. the 76004PR cordless hole puncher is ideally suited for applications typically done with electric hand-held twist drills. The operator can easily position the tool when working in narrow or awkward positions by rotating the handle 360 degrees in either direction during operation. The punch can be jogged down to the center mark to confirm hole location accuracy. The model includes the new “Power Retractable” Punch system which allows the operator to power reverse the punch back out of hole. This improves productivity in harder, more elastic materials which tend to grip the punch (not allowing it to auto return to the home position) after the hole is produced.

Its motor is powered by an 40V DC Lithium-ion battery that can be fully charged quickly using the included battery charger. It can punch over 100 holes through 3/8” mild steel on a single battery charge. Hougen offers other models of Electro-hydraulic portable hole punchers for making holes up to 15/16″ in diameter through material up to 1/2″ thick.

www.hougen.com