Supplier Directory Subscribe
Advertisement
Advertisement
Advertisement
Advertisement
Home / Safely Inspect Small-Diameter Tube and Pipe Welds in Real Time

Safely Inspect Small-Diameter Tube and Pipe Welds in Real Time

Suitable for outside diameters of 0.2 to 8 inches (5 to 200 mm) and maximum bead widths of 0.4-inch (10 mm), Xiris Automation’s WI-2200 weld inspection system incorporates a Class 2 laser that won’t injure employees.

Posted: March 7, 2021

Xiris Automation’s WI-2200 post-weld inspection system with Class 2 laser lowers setup and downtime by detecting defects small-diameter tube and pipe mills in real time on. Diameters range from 0.2 to 8 inches (5 to 200 mm; maximum bead width is 0.4-inch (10 mm).
Advertisement
Advertisement

The WI-2200 weld inspection system from Xiris Automation Inc. (Ontario, Canada) detects 0.015-mm mismatches, undercuts, sunken welds, bead height, deflection, freeze line, and scarfing defects on tube and pipe with outside diameters from 0.2 to 8 inches (5 to 200 mm) and maximum bead width of 0.4-inch (10 mm) in real time. The camera can be added to most tube mills that employ open arc welding, such as laser, TIG, or plasma power sources, as well as on clean HF and ERW mills.

The vision system incorporates a Class 2 laser that, with an output of less than 1 milliwatt (mW), won’t burn skin or harm the human eye. This makes installing and using the system safer and easier and eliminates the need for a safety officer.

Users can adjust the camera exposure to control the brightness of the laser line in the acquired image, which provides more linear control over the laser line for better inspection.

www.xiris.com

Subscribe to learn the latest in manufacturing.

Calendar & Events
Design-2-Part Show
November 19 - 20, 2024
Nashville, TN
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement