Supplier Directory Subscribe
Advertisement
Advertisement
Advertisement
Advertisement
Home / Burr-Free Cutoff Machining

Burr-Free Cutoff Machining

Available for both electrochemical (ECG) and abrasive applications, Glebar’s Tridex CS1-E cutoff machine uses an electrochemical reaction to produce burr-free cuts on tubing from 0.012 inches to 3.15 inches in diameter.

Posted: March 4, 2020

Available for both electrochemical (ECG) and abrasive applications, Glebar’s Tridex CS1-E cutoff machine uses an electrochemical reaction to produce burr-free cuts on tubing from 0.012 inches to 3.15 inches in diameter.
Advertisement
Advertisement

Available for both electrochemical (ECG) and abrasive applications, the Tridex CS1-E cutoff machine from Glebar Co. (Ramsey, NJ) uses an electrochemical reaction to produce completely burr-free tube cuts when required; for example, with stainless steel tubing and small-diameter bars.

The machine can be configured as either right-handed or left-handed. This allows floor layouts of up to four machines to be operated by one person. Other benefits include:

  • Burr-free, stress-free cuts
  • Tight tolerances
  • No metallurgical damage
  • No heat affected zone
  • No recast layer
  • No burning or work hardening

The conductive grinding wheel, high current DC power supply, and electrolyte fluid produce accurate, burr-free, and stress-free cuts on tubing from 0.012 in to 3.15 in  (0.3 mm to 80 mm) in diameter.

Glebar Co., 565 E. Crescent Ave., Ramsey, NJ 07446, 201-337-1500, [email protected], www.glebar.com.

Subscribe to learn the latest in manufacturing.

Calendar & Events
Southeast Design – 2-Part Show
September 11 - 12, 2013
Greenville, SC
Mid-Atlantic Design – 2-Part Show
September 25 - 26, 2013
Phoenixville, PA
CMTS of Canada
September 30 - October 3, 2013
Mississauga, Canada
DISCOVER 2013
October 8 - 16, 2013
Florence, KY
Wisconsin Manufacturing and Technology Show
October 8 - 10, 2013
Wisconsin State Fair Park Exposition Center Halls B&C
WESTEC 2013
October 15 - 17, 2013
Los Angeles, CA
SOUTH-TEC
October 29 - 31, 2013
Greenville, SC
New England Design-2-Part Show
October 30 - 31, 2013
Marlborough, MA
DMG / Mori Seiki Manufacturing Days
November 12 - 15, 2013
Mori Seiki Manufacturing – Davis, CA
FABTECH
November 18 - 21, 2013
McCormick Place – Chicago, IL
Midwest Design-2-Part Show
November 20 - 21, 2013
Northern Kentucky Convention Center – Covington, KY
PCD Tool Manufacturing
November 20, 2013
United Grinding North America – Fredricksburg, VA
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement