Supplier Directory Subscribe
Advertisement
Advertisement
Advertisement
Advertisement
Home / Custom Forklift Attachment Enhances Stamping Plant Productivity

Custom Forklift Attachment Enhances Stamping Plant Productivity

Caldwell Group tool facilitates delivery of 11-to-12-ton steel coils at MiTek USA.

Posted: December 24, 2019

Each railcar holds six or seven steel coils weighing 11 tons to 12 tons each, and a train may have six railcars.
Lifting solutions manufacturer Caldwell Group’s coil lifter attaches to a forklift truck.
Coils can shift during transit and arrive very close to each other. For the grab to fit, the attachment’s lifting shoes pivot and the legs are very thin.
Once picked, coils are taken to a loading dock.
Advertisement
Advertisement

Imagine your job involved being lifted to the edge of an 11- or 12-foot-high railroad car, then passing a sling through a very large object and attaching it to a hook.

“I put myself in the railcar to experience it from the rigger’s viewpoint, and it wasn’t pretty,” says Ken Jurgensmeyer, manufacturing operations director at MiTek USA’s stamping plant in Tampa, Fla.

Every year, MiTek takes delivery of 55,000 tons of master coils, wide rolls of steel slit into narrower coils. Each 11-to-12-ton coil must be lifted from the railcar and moved into inventory. Until recently, the process required three people: two lift truck drivers in addition to the person perched precariously at the railcar.

“We used a 35,000-lb Taylor TH350 lift truck with a wire rope sling strapped over the center of 6-ft-long forks,” says Jurgensmeyer. “We’d make the connection by manually passing it through the coil’s eye and attaching it with a swivel hook. We often had to lift at an angle because of how far away we sometimes had to position the forklift. Once we picked the coil, it was taken to the loading dock and awkwardly swung into position so a second lift truck could move it onward.”

International deliveries are trucked to the plant, but domestic steel comes by train. Each railcar contains six or seven coils and a train might have six cars. Longer trains with up to 94 coils a week have begun coming in from domestic suppliers who want them back as soon as possible, requiring increased throughput.

“Someone could’ve been injured, so our first priority when Ken contacted us was designing a system that eliminated manually rigging the load,” says Dan Mongan, special application support/new product development specialist for Caldwell Group Inc., a lift manufacturer in Rockford, Ill. The result was a 24,000-lb-capacity forklift attachment supplied by Certified Slings & Supply, a Caldwell distributor in Tampa, that MiTek calls the master coil lifter.

“Coils can shift during transit, so they’re very close to each other,” says Mongan. “For the grab to fit, the lifting shoes pivot and the legs are very thin. We were also able to speed production considerably. Even the transfer to the second lift truck is improved because we lower the coils onto a frame from which they’re easily picked.”

What used to take all day is now done more safely in less time with fewer people. Unloading a railcar takes 20 minutes instead of one hour and no longer requires a rigger beneath the forks.

Jurgensmeyer’s team introduced the attachment to MiTek locations worldwide, and a plant in Phoenix has had similar safety and efficiency gains.

www.caldwellinc.com

Caldwell Group, 4080 Logistics Parkway, Rockford, IL 61109, 815-229-5667, www.caldwellinc.com.

 

Keep Reading From Our Material Handling Feature:

INVERTERS AUTOMATE STACK-FLIPPING

Automatic Feed Co.’s (AFCO) (Napoleon, OH) bundle turnovers flip an entire stack 180 degrees bottom over top. The material inverters eliminate the difficult task of flipping metal blanks by hand or by crane, reducing the potential for damage and enabling the same die to be used for stamping left-hand and right-hand mirror-image components.

TWO NEW PRODUCTS FROM BILSING

New ultrahigh-modulus pitch-based carbon fiber composite tooling from Bilsing Automation North America (Roseville, MI) is 3.5 times stiffer than steel tooling at less than half the weight … and

Bilsing’s PSB-20 pneumatic grippers can now be used to detect double blanks in hot- and cold-forming operations.

 

ONE CRANE, TWO AUTOMATION OPTIONS

Unified Industries (Brighton, MI), a Columbus McKinnon Corp. company, introduces the ProPath, a workstation crane that gives operators two levels of automation via Magnetek Material Handling’s IMPULSE variable-frequency drives …

 

THREE SMART TOOLS FOR SMART FACTORIES

Best-suited for handling small parts, picking, or working in close proximity to humans, Festo Corp.’s (Islandia, NY) DHEF adaptive-shape gripper holds a range of shapes, unaligned objects, and several objects at once without the need to change grippers.

 

FULLY INTEGRATED LASER AUTOMATION

Mitsubishi Electric Corp. (Tokyo) partner MC Machinery Systems (Elk Grove Village, IL) offers an automation system developed by Mitsubishi company ASTES4 (Balerna, Switzerland). Each of the sheet metal laser cutter’s four robotic grippers uses vacuum or magnetic tools in various shapes and sizes to more efficiently sort.

 

DUAL-PURPOSE AUTOMATIC TOOL CHANGER

The Transforming Tooling robot from Norgren Automation Solutions (NAS) (Saline, MI) lowers press room and stamping downtime 50% by eliminating prestaging. Choose from the controller’s library of jobs and the robot does the rest: returns the tool it was using to its storage location on the die, moves to the tool it needs for the next job, and retools itself.

 

REMOVABLE FORKS ENHANCE VERSATILITY

Removing the forks from Verti-Lift’s (Louisville, KY) 90-degree tilt table gives  workers 360-degree access while the table’s in the horizontal position. After assembly, they can set the product on the floor to be rolled to the next process or moved by pallet jack if fork truck space is limited.

Subscribe to learn the latest in manufacturing.

Calendar & Events
FABTECH 2024
October 15 - 17, 2024
Orlando, FL
Design-2-Part Show
October 16 - 17, 2024
Marlborough, MA
Design-2-Part Show
October 23 - 24, 2024
Akron, OH
SEMA
November 5 - 8, 2024
Las Vegas, NV
Design-2-Part Show
November 19 - 20, 2024
Nashville, TN
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement