Supplier Directory Subscribe
Advertisement
Advertisement
Advertisement
Advertisement
Home / How to Clean Difficult-to-Reach Surfaces at Room Temp

How to Clean Difficult-to-Reach Surfaces at Room Temp

With its low surface tension, D-Greeze 500 from Solvent Kleene easily removes lubricating oils, grease and other contaminants from blind holes, small orifice openings and other tight surfaces after machining.

Posted: September 10, 2019

D-Greeze 500 cleaner from Solvent Kleene easily penetrates, emulsifies and removes lubricating oils, grease, and other contaminants that remain after machining. It eliminates the problem of flash rust by leaving a film that can easily be removed by blow off with low pressure, high-velocity air knife or compressed air. This cleaner is compatible with ferrous and non-ferrous metals, non-hazardous, non-flammable, non-corrosive and non-HAP.
Advertisement
Advertisement

Cleaning difficult-to-reach blind holes, small orifice openings and other tight surfaces are difficult to clean, but Solvent Kleene, Inc. (Peabody, MA) has made this task easy with their D-Greeze 500 cleaner. With its low surface tension, D-Greeze 500 easily penetrates, emulsifies and removes lubricating oils, grease, and other contaminants that remain after machining. It eliminates the problem of flash rust by leaving a film that can easily be removed by blow off with low pressure, high-velocity air knife or compressed air. This cleaner is compatible with ferrous and non-ferrous metals, non-hazardous, non-flammable, non-corrosive and non-HAP. D-Greeze 500 is sold in 5 gal pails and 55 gal drums. To test its performance, free samples are available.

Solvent Kleene, Inc. 119 Foster Street, Building 6, Peabody, MA 01960, 978-531-2279,  [email protected]solventkleene.com.

Subscribe to learn the latest in manufacturing.

Calendar & Events
Southeast Design – 2-Part Show
September 11 - 12, 2013
Greenville, SC
Mid-Atlantic Design – 2-Part Show
September 25 - 26, 2013
Phoenixville, PA
CMTS of Canada
September 30 - October 3, 2013
Mississauga, Canada
DISCOVER 2013
October 8 - 16, 2013
Florence, KY
Wisconsin Manufacturing and Technology Show
October 8 - 10, 2013
Wisconsin State Fair Park Exposition Center Halls B&C
WESTEC 2013
October 15 - 17, 2013
Los Angeles, CA
SOUTH-TEC
October 29 - 31, 2013
Greenville, SC
New England Design-2-Part Show
October 30 - 31, 2013
Marlborough, MA
DMG / Mori Seiki Manufacturing Days
November 12 - 15, 2013
Mori Seiki Manufacturing – Davis, CA
FABTECH
November 18 - 21, 2013
McCormick Place – Chicago, IL
Midwest Design-2-Part Show
November 20 - 21, 2013
Northern Kentucky Convention Center – Covington, KY
PCD Tool Manufacturing
November 20, 2013
United Grinding North America – Fredricksburg, VA
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement