Supplier Directory Subscribe
Advertisement
Advertisement
Advertisement
Advertisement
Home / Fume Extractor with Large Capture Zone Increases Safety and Productivity

Fume Extractor with Large Capture Zone Increases Safety and Productivity

ZoneFlow technology in the SWX-ZF weld fume extractor from Miller Electric features a capture zone that’s over 3X larger than traditional systems.

Posted: July 15, 2019

With a capture distance up to 5 ft deep and 4 ft wide vs. the traditional 12 in to 18 in, ZoneFlow technology in a FILTAIR SWX-ZF stationary wall- or column-mounted weld fume extractor from Miller Electric moves clean air out of the arm at approximately a 90 deg angle, creating a large negative pressure zone or curtain that extends the capture distance and funnels weld fume particulate toward the center of the arm to be captured.
Advertisement
Advertisement

An expanded capture zone plays a critical role in an overall cleaner facility, leading to less maintenance and cleaner air throughout the workplace while also reducing arm interactions for improved productivity. Available in a disposable cleaning filter model in the FILTAIR® SWX-ZF stationary wall- or column-mounted weld fume extractor from Miller Electric Mfg. LLC (Appleton, WI), ZoneFlow technology features a capture zone that’s over 3X larger than traditional systems. With a capture distance up to 5 ft deep and 4 ft wide vs. the traditional 12 in to 18 in, operators prefer fume extraction equipment with ZoneFlow. Instead of having to constantly adjust the arm to be close to the source – or worse, not adjust it and be exposed to fumes – they can continue welding, improve productivity and stay protected. How does it work? ZoneFlow moves clean air out of the arm at approximately a 90 deg angle, creating a large negative pressure zone or curtain that extends the capture distance and funnels weld fume particulate toward the center of the arm to be captured.

Miller Electric Manufacturing LLC, 1635 West Spencer Street, PO Box 1079, Appleton, WI 54912-1079, 920-734-9821, www.millerwelds.com.

Subscribe to learn the latest in manufacturing.

Calendar & Events
Southeast Design – 2-Part Show
September 11 - 12, 2013
Greenville, SC
Mid-Atlantic Design – 2-Part Show
September 25 - 26, 2013
Phoenixville, PA
CMTS of Canada
September 30 - October 3, 2013
Mississauga, Canada
DISCOVER 2013
October 8 - 16, 2013
Florence, KY
Wisconsin Manufacturing and Technology Show
October 8 - 10, 2013
Wisconsin State Fair Park Exposition Center Halls B&C
WESTEC 2013
October 15 - 17, 2013
Los Angeles, CA
SOUTH-TEC
October 29 - 31, 2013
Greenville, SC
New England Design-2-Part Show
October 30 - 31, 2013
Marlborough, MA
DMG / Mori Seiki Manufacturing Days
November 12 - 15, 2013
Mori Seiki Manufacturing – Davis, CA
FABTECH
November 18 - 21, 2013
McCormick Place – Chicago, IL
Midwest Design-2-Part Show
November 20 - 21, 2013
Northern Kentucky Convention Center – Covington, KY
PCD Tool Manufacturing
November 20, 2013
United Grinding North America – Fredricksburg, VA
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement