Home / Pressure/Flow Hybrid Regulator for HVAC Applications

Pressure/Flow Hybrid Regulator for HVAC Applications

For brazing, purging and pressure testing, the Victor EDGE 2.0 ESS32 PFH800 from ESAB combines flow and pressure regulation functions in a single device.

Posted: September 30, 2018

With its patented hybrid design, the Victor EDGE 2.0 ESS32 PFH800 from ESAB combines flow and pressure regulation functions in a single device that can be used by HVAC technicians for pressure tests, purging and brazing.

Victor, an ESAB brand, offers the EDGE™ 2.0 ESS32 PFH800 pressure/flow hybrid regulator designed for three common HVAC applications: brazing, purging and pressure testing. Traditionally, a regulator would either be a flow regulation device or a pressure delivery regulation device. With its hybrid design, the EDGE 2.0 ESS32 PFH800 combines flow and pressure regulation functions in a single device. The new regulator provides adjustability between:

3 – 6 CFH for using nitrogen as a backing gas when brazing
20 – 50 CFH for nitrogen purge applications
200 – 800 psi to conduct pressure tests

To create this wide range of adjustability, a new, patent-pending dual-stage gas flow orifice has been designed. The first stage orifice enables lower flow rates. When the flow rate applies sufficient backpressure, it pushes open the first stage orifice poppet, which then allows gas flow to bypass the smaller first stage orifice and flow through a larger, second stage orifice at higher flow rates and pressures. For added clarity, the EDGE 2.0 hybrid regulator features an large diameter delivery gauge and uses a high-contrast, color-coded gauge face with labels for braze, purge and pressure test settings. The cylinder pressure gauge is smaller and offset to create a difference in depth perception. Even from a distance, operators can tell if they have sufficient cylinder contents and if delivery pressure is within safe and acceptable ranges.

The ESS32 PFH800 features a sloping gauge guard, a modular gauge and provides safer operation through three primary design functions:

Patented SLAM™ (Shock Limitation and Absorption Mechanism) technology built into the adjusting knob, permitting the knob to absorb the impact in the event of a cylinder fall.
Compact, patented design styling that integrates the gauge into the regulator body for superior safety and protection.
Incorporating a patented particle trap so the regulator could pass ASTM G-175 promoted ignition test.

ESAB Welding & Cutting Products, PO Box 100545, 411 South Ebenezer Road, Florence, SC 29501, 843-669-4411, Fax: 843-664-4258, www.esab.com.