Home / Fully Automated Sawing of Complex Angles on Structural Material

Fully Automated Sawing of Complex Angles on Structural Material

The fully automatic AV-2026NC bandsaw from Cosen Saws cuts complex angles on structural material either on the front end, the back end or both. It is capable of making a bull nose angle cut, which manufacturers often use to make bracing parts, as well as making opposing angles, parallelograms, polygons, and straight cuts.

Posted: May 29, 2018

Ideal for shops that produce trailers, cell phone towers, oil derricks, conveyors or roller tables, the fully automatic AV-2026NC bandsaw from Cosen Saws cuts complex angles on structural material either on the front end, the back end or both. It is capable of making a bull nose angle cut, which manufacturers often use to make bracing parts, as well as making opposing angles, parallelograms, polygons, and straight cuts.

The AV-2026NC bandsaw is the latest answer from Cosen Saws USA (Charlotte, NC) to the call for more automation in structural steel fabrication. It combines their vertical tilt frame saw with Mechalogix software and an automated feeder for an advanced, fully automatic sawing system that allows operators to push a button and walk away until the job is completed. The operator can choose from a number of cut configurations on the easy to use touch screen, and the saw takes care of the rest. Any manufacturer that is making angle cuts on structural material would benefit from incorporating the AV-2026NC into their shop. A typical user of the AV-2026NC produces trailers, cell phone towers, oil derricks, conveyors or roller tables. Customers are getting a lot of capacity in a relatively small 180 in long by 135 in wide foot print. It has a max capacity of 20 in x 26 in at 90 deg.

This automatic saw is suited for manufacturers who have more complex angles to cut either on the front end, the back end or both. It is capable of making a bull nose angle cut, which manufacturers often use to make bracing parts. The saw is also capable of making opposing angles, parallelograms, polygons, and straight cuts. The saw feeds up to 59 in per single shuttle that can be programmed to index up to 999 in of material. With the machine’s tight tolerance and repeatability, it will save shops time and money in terms of tooling costs and additional machining time. If any of the manufacturing steps involve robotic welders, then the cut parts need to be exact. The AV-2026NC is an ideal bandsaw for any production fabricator.

Cosen Saws USA, 4527 Dwight Evans Road, Charlotte, NC 28217, 704-943-1030, [email protected], www.cosen.com.