Home / Virtual Calculator Finds the Bottom Line of CMM Inspection

Virtual Calculator Finds the Bottom Line of CMM Inspection

The virtual calculator from AIMS Metrology helps shops find out in “real time” how much money they save by using a Renishaw REVO 2 5-axis scanning probe on their Revolution LM CMM.

Posted: March 16, 2018

An easy, quick to use virtual calculator from AIMS Metrology helps shops find out in “real time” how much money they save by using a Renishaw REVO 2 5-axis scanning probe on their Revolution LM CMM. They can test their production parameters against a REVO-equipped LM in the time it takes to plug in the current inspection method, average number of inspections per hour and average inspection time.

Coordinate measuring machine manufacturer AIMS Metrology (Dayton, OH) offers a virtual calculator designed to help shops find out in “real time” just how much money they will save by using a REVO 2 5-axis scanning probe from Renishaw Inc. (West Dundee, IL). Their flagship CMM, the Revolution LM, is designed around the REVO 2, which is equipped with an RVP vision probe that provides non-contact vision measurements on a 5-axis platform with infinite positioning. The calculator is easy and quick to use. In the time it takes to plug in basic data – current inspection method, average number of inspections per hour and average inspection time (in minutes) – manufacturers can test their production parameters against the REVO-equipped LM. The screen can be refreshed for multiple uses with different data combinations.

For example, a machine shop that performs 60 inspections an hour and spends one minute per inspection without using a CMM could net an annual savings of $99,330 by switching to the REVO 2. To take this a step further, a shop that uses a manual CMM to perform 20 inspections an hour at five minutes per inspection would save $155,550 with REVO 2. Manufacturers that perform inspections with automated CMMs can also expect a savings with the REVO 2. For shops that use an automated CMM equipped with a conventional probe to perform 60 inspections per hour at one minute per inspection, a switch to REVO 2 captures a savings of $66,670. The REVO 2 is designed to maximize CMM throughput while maintaining high system accuracy and uses synchronized motion as well as Renscan5 measurement technology to minimize the dynamic effects of CMM motion at ultra-high measurement speeds.

The REVO 2 delivers high performance scanning, non-contact inspection and surface finish analysis, making the LM a multi-solution inspection tool. To use the AIMS calculator, please click here.

Advanced Industrial Measurement Systems, 2580 Kohnle Drive, Miamisburg, OH 45342, 937-320-4930, www.aimsmetrology.com.