Advanced Roll Forming Operations

In Booth S-3381, Samco Machinery Ltd. (Toronto, ON) will display videos and a variety of samples of products produced by their roll formers, including their new continuous and high-performance Bridge Decking Roll Forming Line with a post-cut operation. All four profiles (2 in, 2-1/2 in, 3 in, 4 in) are roll formed, end formed in the press and cut-to-length, utilizing quick changeovers from one profile to the other using rafted tops (cassettes) with quick-coupling disconnects. Key features of this line include:

• 20K single-ended uncoiler with coil car, hydraulically powered full time, driven with mandrel expansion.
• Hydraulically powered Up/Down threading table to assist in threading raw materials into the system.
• Length control system helps operator set length and quantity.
• 28 pass rafted roll former with gear box drive at every station.
• Stationary hydraulic cut-off press, suitable for “stop-and-go” cut and form operation.
• 20 ft non-powered run-out roller exit conveyor pushed completed parts out.

Samco Machinery provides shops with leading edge designs and cost-effective solutions to satisfy any metal roll forming project need. Maintaining ISO 9001 certification, the company manufactures roll forming machines, decoilers, roll form dies and presses servicing a multitude of shops worldwide in varied industries.

Samco Machinery Ltd, 351 Passmore Avenue, Toronto, ON M1V 3N8 Canada, 416-285-0619, [email protected], www.samco-machinery.com.