Vertical Metal Cutting Bandsaw

In Booth S-2109, HE&M Saw, Inc. (Pryor, OK) will be featuring their VT120HA-60-TS vertical metal cutting bandsaw that uses a 1.25 in x 16 ft 6 in x .042 in blade, with a 4 deg blade cant, powered by a 5 hp motor. The saw has a cutting capacity of 18 in horizontal by 24 in vertical at 90 deg, 18 in by 16 in at 45 deg left miter, 18 in by 14.75 in at 45 deg right miter, 18 in by 10 in at 60 deg left miter, and 18 in by 9 in at 60 deg right miter. The VT120HA-60-TS has a 0 to 48 in stroke bar-feed with multiple indexing for longer cutting applications.

https://youtu.be/hS19XqvVSmg

The VT120HA-60-TS uses touch screen controls that make programming and running jobs in automatic easy. Previous jobs can be saved and reloaded any time. A standard material list is available on the touch screen with a database of the most common materials ranging from structural steels to high tensile specialty alloys, with each displaying the recommended blade speed, cutting rates and blade pitch for the type and size of the material. A series of cuts, to be cut from the same bar stock, can be programmed with the touch screen by entering jobs that will be run in a sequence. A control panel and help files are also available from the touch screen to help assist in operating the saw and troubleshooting. Other features include power tilt, full stroking vises, built-in coolant system, and a patented cut watcher.

HE&M Saw, Inc., PO Box 1148, Pryor, OK 74362, 918-824-6267, [email protected],www.hemsaw.com .