Supplier Directory Subscribe
Advertisement
Advertisement
Advertisement
Advertisement
Home / Optical Bend Guiding System With Laser Angle Measurement

Optical Bend Guiding System With Laser Angle Measurement

The combination of the Optical Bend Guiding System and the Laser Angle Measuring System (LAMS) from Bystronic greatly enhances press brake operations, increases productivity and increases part accuracies.

Posted: January 7, 2014

The Laser Angle Measuring System automatically positions and laser measures each angle produced to ensure part accuracy to within nearly a quarter of a degree of the programmed angle. 
The Optical Bend Guiding System guides the operator through all machine setup and bending sequences to reduce setup times and ensure part quality.
Advertisement
Advertisement

The Optical Bend Guiding System from Bystronic Inc. (Elgin, IL) encompasses LED technology that greatly enhances press brake operations and reduces setup times. The LED bar located above the tool clamping in the ram enables easier tool positioning, more effective station guiding, clear back gauge positioning, clamping open, error, and end of job indications.

http://youtu.be/_IMcDrNQeco
Demonstration of Xpert from Bystronic with Optical Bend Guiding System that provides easier tool positioning, clear back gauge position indication, more effective station guiding, clamping open information, error indication, and end of job indication.

The Optical bend guidance system guides the operator through all of the machine setup and bending sequences, reducing setup times and ensuring part quality. When you absolutely have to have the highest part accuracy from the very first bend, the Laser Angle Measuring System (LAMS) automatically positions depending on the bending station and uses a laser measuring system for each angle that is produced and ensures the highest part accuracy to within nearly a quarter of a degree of the programmed angle.

http://youtu.be/lX4zQNtPu-8
Demonstration of how, with just a single measuring point, LAMS guarantees maximum bending accuracy, guarantees that even the first part is a good part, and is the correct option for Xpert users who place the very highest of demands on the system.

The combination of the Optical Bend Guiding System and the LAMS greatly enhances press brake operations, increases productivity and increases part accuracies.

Bystronic Inc., 200 Airport Road, Elgin, IL 60123, 847-214-0300, Fax: 847-214-0299, [email protected], www.bystronicusa.com.

Subscribe to learn the latest in manufacturing.

Calendar & Events
Southeast Design – 2-Part Show
September 11 - 12, 2013
Greenville, SC
Mid-Atlantic Design – 2-Part Show
September 25 - 26, 2013
Phoenixville, PA
CMTS of Canada
September 30 - October 3, 2013
Mississauga, Canada
DISCOVER 2013
October 8 - 16, 2013
Florence, KY
Wisconsin Manufacturing and Technology Show
October 8 - 10, 2013
Wisconsin State Fair Park Exposition Center Halls B&C
WESTEC 2013
October 15 - 17, 2013
Los Angeles, CA
SOUTH-TEC
October 29 - 31, 2013
Greenville, SC
New England Design-2-Part Show
October 30 - 31, 2013
Marlborough, MA
DMG / Mori Seiki Manufacturing Days
November 12 - 15, 2013
Mori Seiki Manufacturing – Davis, CA
FABTECH
November 18 - 21, 2013
McCormick Place – Chicago, IL
Midwest Design-2-Part Show
November 20 - 21, 2013
Northern Kentucky Convention Center – Covington, KY
PCD Tool Manufacturing
November 20, 2013
United Grinding North America – Fredricksburg, VA
Advertisement
Advertisement
Advertisement
Advertisement
Advertisement