New Standard for Heavy Lifting

SAFETY FEATURES
Standard AutoSenz® D-Series VRC Overload Detection System:

• Protects your material and the lift should a jam occur
• Intelligent PLC Control
• Operator Interface with text message display
• Extensive system diagnostics
• Records VRC events and Fault History
• System maintenance reminder
• Robust structural frame: 4 wide-flange beams
• Broken chain free-fall safety system

Optional Safety Features:

• CargoLok™ Carriage Gate— securely encloses large rolling loads
• Audible Alarm System —sounds if CargoLok carriage gate is left open or not properly latched
• SafeLock™ system locks carriage at upper levels for added safety

SAFETY GUARDING: The ANSI/ASME B20.1 code requires safety gates and 8 ft high guarding on all accessible sides of the lift. 4XLift™ gates have electrical and mechanical interlocks that prevent VRC operation if the gates are not fully closed; and gates cannot be opened if the carriage is not at the designated level.

ELECTRICAL: UL-508A Labeled Control Panel. 208/230/460 VAC, 3-phase (Single-phase option available). Control voltage is 24 volts. Optional “quick-connect” wiring for VRC push-buttons and gate interlocks is available. Optional “gate-open” audible alarm.

CALL STATIONS: The main control panel is rated NEMA 12. NEMA 4 call/send stations included for each level have self-maintaining push-buttons and a mushroom-head E-Stop.

SHIPMENT: Consult factory for shipment options. 4XLift™ VRCs typically ship on a flat-bed truck for side off-loading at site.

DESIGNED & MANUFACTURED to meet ANSI/ASME B20.1 “Safety Standard for Conveyors.” Lift is for material transfer only. RIDERS ARE NOT PERMITTED.

Wildeck Inc., 405 Commerce Street, Waukesha, WI 53186, 262-549-4000, Fax: 262-549-3466, [email protected], www.wildeck.com.