FULLY HYDRAULIC ADJUSTABLE PLATE BENDING ROLLS
Cole-Tuve‘s plate bending rolls that are currently making an impressive market appearance are VIRLI Models 3R-UHS with variable distances between the two lower rolls and a vertically adjustable upper roll. These are fully hydraulic, 3-roll rolls on which each of the two lower rolls is adjustable horizontally and independently.
Posted: October 29, 2008
Cole-Tuve's plate bending rolls that are currently making an impressive market appearance are VIRLI Models 3R-UHS with variable distances between the two lower rolls and a vertically adjustable upper roll. These are fully hydraulic, 3-roll rolls on which each of the two lower rolls is adjustable horizontally and independently. Thus the positions of the rolls can be changed to operate as a pyramid, initial-pinch or double-pinch roll. Therefore for any job, it is possible to select the best position of the lower rolls in relation to the functioning of the vertical adjustment of the upper roll.
In addition to its normal bending function, the vertical adjustment of the upper roll allows it to be used for pressing when such an operation can improve bending, as for heavy cones. This also provides optimum prebending capability. All adjustments of the rolls and operation of the drop-end are hydraulic, with controls located in a rolling console.
Other features include induction hardened rolls, three electronic digital readouts (one for each of the rolls), cone bending attachment, extra-large openings between the upper and lower rolls to accept some thick narrow plates and even some structurals, and easy retro-fit of overhead and side support devices if required after the machine has been put into operation. Capacities range from 5' to 12' lengths x thicknesses up to 3 in. Overall, these machines can bend a wider range of thicknesses from minimum to maximum.
Subscribe to learn the latest in manufacturing.
Industry News
